Table of contents
Directory
Updated at 2020-03-20 16:00:22

TARS-HTTP-SERVER Description

Directory Structure

  1. scripts Store the scripts required by the business, such as tars2php.sh, which is responsible for generating the code required by the client based on the tars file

  2. src The directory where the business logic is located mainly contains the following structure:

    • component: Stores the base class of the Controller, which is convenient for all Controllers
    • conf: configuration required by the business, here is just a demo, if the configuration is issued from the platform, it will also be written to this folder by default;
    • controller: C layer in MVC model;
    • servant: The client code generated by tars2php, this directory name can be completely customized, and only needs to be distinguished when it is used;
    • composer.json: state the project's dependencies
    • index.php: The entry file for the entire service. The file name can be customized, but you must change the private template on the platform. Add the entry field under server.
    • services.php: declare the base namespaceName of the entire project
  3. tars The tcp service depends on the example.tars file under this folder The tars.client.proto.php file is necessary to generate the code for the servant, which will be explained in the following guideline.

Service Deployment Guideline

  1. Enter Operations Management => Template Management The platform will provide a new template for PHP, named tars.tarsphp.default. !!!!!!! You must first modify the execution path of PHP !!!!!!! Secondly, there are two ways to ensure that the http-server uses the correct template:
    • Create a new tars.tarsphp.http by yourself, add the following content:
<tars>
 <application>
...
    <client>
...
   </client>
   <server>
     ...
      protocolName=http
    </server>
 </application>
</tars>

Just add it in :

  protocolName=http
  • The second way is to add this part to the private template:
    <tars>
     <application>
      <client>
     </client>
     <server>
        protocolName=http
      </server>
     </application>
    </tars>
    
  1. Enter Operations Management => Deployment Services, fill in the corresponding application name and service name, note that this is the same as tars.proto.php in the tars folder below Need to be completely consistent.
  2. Select the service type as tars_php
  3. Select the template as the http service template just created, set is not enabled by default
  4. Select an available port and fill in the server's intranet IP
  5. The port type is TCP !!!! Protocol type HTTP service must choose non-TARS !!!!!!
  6. The number of threads corresponds to the number of SWOOLE processes
  7. The maximum number of connections, the maximum queue length, and the queue timeout period are not effective for the PHP service.
  8. Click Add and Submit, then please enter the development guidline

Development guideline

  1. Create the corresponding directory structure, fixed to scripts, src and tars
  2. Create a new directory under src and copy the component and controller folders in the example
  3. Create a new composer.json file with the following content:
{
   "name" : "tars-http-server-demo",
   "description": "tars http server",
   "require": {
       "phptars/tars-server": "~0.2",
       "phptars/tars-deploy": "~0.1",
       "phptars/tars2php": "~0.1",
       "phptars/tars-log": "~0.1",
       "ext-zip" : ">=0.0.1"
   },
   "autoload": {
       "psr-4": {
           "HttpServer\\" : "./"

       }
   },
   "minimum-stability": "stable",
   "scripts" : {
       "deploy" : "\\Tars\\deploy\\Deploy::run"
   }
}

The psr-4 in name, description, and autoload can be modified to what you need. Here we take this as an example.

  1. Create index.php under src with the following content:
<?php
require_once(__DIR__."/vendor/autoload.php");

use \Tars\cmd\Command;

//php tarsCmd.php  conf restart
$config_path = $argv[1];
$pos = strpos($config_path,"--config=");

$config_path = substr($config_path,$pos+9);

$cmd = strtolower($argv[2]);

$class = new Command($cmd,$config_path);
$class->run();

This file is responsible for startup and entry loading

  1. Create a new services.php file with the following content:
      <?php  
      // Load the code in namespace mode under the framework of psr4 
      return [
       'obj' => [
           'namespaceName' => 'HttpServer\\',
           'saveTarsConfigFileDir' => 'src/conf/', //File save directory pulled from tarsconfig, Default is src/conf
           'saveTarsConfigFileName' => [ '',], //The name of the file that needs to be pulled from tarsconfig. Configure on the web
           'monitorStoreConf' => [
               //Use redis to cache main report information
               //'className' => Tars\monitor\cache\RedisStoreCache::class,
               //'config' => [
               // 'host' => '127.0.0.1',
               // 'port' => 6379,
               // 'password' => ':'
               //],
               //Use swoole_table to cache the main report information (default)
               'className' => Tars\monitor\cache\SwooleTableStoreCache::class,
               'config' => [
                   'size' => 40960
               ]
           ],
           'registryStoreConf' => [
               'className' => Tars\registry\RouteTable::class,
               'config' => [
                   'size' => 200
               ]
           ],
           'protocolName' => 'http', //http, json, tars or other
           'serverType' => 'http', //http(no_tars default), websocket, tcp(tars default), udp
       ],
      ]; 
    

namespaceName is the namespace name actually used by the business and must correspond to the configuration in composer.json monitorStoreConf Storage configuration for the main report information

  - className is the class name of the storage implementation class for the main report information. The default is \Tars\monitor\cache\SwooleTableStoreCache::class Use swoole_table storage, and tars-monitor also provides the redis storage method. Users can also customize new implementations, but must implement the \Tars\monitor\contract\StoreCacheInterface interface   - config is the configuration information of the implementation class that stores the main report information. It is passed as a parameter when the implementation class is initialized. The default value corresponds to the size of swoole_table.

  1. composer install, load the corresponding dependencies
  2. Create a new conf directory to store the configuration under src. The default is ENVConf.php
  3. Create a new tars.proto.php file under the tars folder, which needs to include a description of your service itself:

      <?php
      return array(
       'appName' => 'PHPTest',
       'serverName' => 'PHPHttpServer',
       'objName' => 'obj',
      );
    

    This name must correspond exactly to the name on the tars platform.

  4. If you just try it, then you can skip to step 14, if you need to call the tars service, please continue

  5. Put the hello.tars of tcp-server into the tars folder, and create a new tarsclient.proto.php file under the tars folder:

      <?php
      return array(
      'appName' => 'PHPTest',
      'serverName' => 'PHPServer',
      'objName' => 'obj',
      'withServant' => false,//choose servant / client to generate automatically 
      'tarsFiles' => array(
          './example.tars'
      ),
      'dstPath' => '../src/servant',
      'namespacePrefix' => 'HttpServer\servant',
      );
    

    APPName, serverName, objName must be exactly the same as those applied on the tars platform. withServant must be false, and specify the path of tarsFiles. dstPath is generally ../ src /?, here is ../ src / servant, so the generated code will go to this folder. namespacePrefix is the namespace of the code, here is HttpServer \ servant, which also corresponds to the name of psr-4 in composer.json.

  6. Executing tars2php.sh under scripts will generate a three-level folder under src/servant

      cd ../tars/
      php ../src/vendor/phptars/tars2php/src/tars2php.php ./tarsclient.proto.php
    

Here is PHPTest/PHPServer/obj    - classes folder - stores files generated by structs in tars    - tars folder - stores tars files    - TestTafServiceServant.php - the actual remote rpc call file

  1. Add the corresponding rpc calling code in the controller. For details, please refer to the demo in the code or the instructions of tars-client.
  2. After completing the code development, execute composer run-script deploy in the src directory to automatically package the code
  3. Upload the packaged code to the tars platform and publish it
  4. take a rest
Chapter